VSHOW New Arrival G3000-3000W Water Fog Machine

Technical Specs

Input Voltage:AC90-130V30-60Hz25A/220V-240V50-60HZ15A

Power Consumption: 3000W

Warm-uptime:4min

Fog output volume: 1000cu.ft/min

Fog coverage: about 80m2~100m2

 Fluid Consumption: 2000mL/h with Maximum .Output Water Consumption:6L/h

DMX channels: 2 channels

CH1 for fog output adjustment

CH2 for fan speed adjustment

With built-in DMX 3-PIN and 5-PIN DMX interface , built-in OLED timer control,OLED constant output and wireless remote control system

Accessory: 1 aerial for improving signal

1 white wireless emitter, a dual-head power cable, a hose, and a fog nozzle.

Machine dimension:575*400*521(mm)

Carton dimension: 710*490*542 (mm) 

N.W: 27KG  G.W.:32KG

In Use

1. Never leave the machine working unattended to avoid an accident.

2. Touching inside the machine is forbidden at any time because there are some elements with high temperatures and some that are rotating at high speeds. 

3. It is for indoor usage only, not outdoor since it is without waterproof function.If it has to work outdoors,  waterproof protection must be provided to avoid the leakage of electricity and any other damage problems.

After use

1. Never pack it right away after stopping work and powering it off; it needs at least 30 minutes for heat dissipation.

2. After a period of time, it is normal to see some water stains on the surface; just clean it with a cloth. 

3. It is not allowed to clean the housing surface with the medical liquid below: petrol, alcohol, thinner, etc. It may cause the silkscreen to disappear; just clean it with clean water and cloth. 

4.Suggest to clean the confetti around the air intake and air outlet every week so that the machine will work with the best status. The most important thing is that the machine must be powered off before cleaning.