GT640 Puzzle Bar Lights 6*40w RGBW 4in1 LED

Product Size:

roduct  D etails:

Product Effect: 

Product Description:

VSHOW new arrival GT640 Puzzle Bar lights 6*40w RGBW 4in1 LED fixture beam zoom wash moving head light

LED technical parameters:

input Voltage: 100-240V, 50/60Hz

Output Voltage: V1:36V (board + LED driver) V2:12V (cooling fan + display)

Power consumption: 220W

Power supply: 300W

Light source: 6x40W RGBW 4IN1 LED

Light source life: 20000+ hours

Can adjust color temperature?

Dimmer:0-100%(16bit)Smooth dimming

Strobe: 1-30Hz/S outstanding strobe effect with variable speed

Zoom angle: 2-45 °

Operate mode: Master/Slave,Auto, DMX512, RDM

DMX Channel: 16/22/36CH

Four dimming modes: linear, square law, inv, SQ Law and S Curve

Color mode: RGB/CMY switching usage

Excellent color mixing effect

Single point single control is possible to create rich effects

Each motor can be independently controlled to achieve 3D stereoscopic effects

The four directions can be seamlessly joined, and the spacing of each LED is the same

Display: LCD display,Touch buttons

3-pin/5-pin512signal In/Out Power in/out

Fixture size: 510.6*85*302mm

N. W:7KG

G. W:9KG

Features ：

This fixture is a multifunctional effect light that integrates beam, dyeing, and dynamic effects. It can achieve seamless splicing of multiple fixtures, and the LED after splicing is still equidistant. The beam emitted by the LED after splicing can cover a wide area, and each can independently control the zoom angle. It has rich built-in color macro effects, adjustable effect direction, color temperature, built-in zoom macro function, variable speed, and RGB/CMY color control mode selection. It can switch in real-time and has multiple dimming modes to meet the needs of different places. The radiator base plate is evenly distributed with 5 PCS silent fans, which can quickly export the heat generated by LEDs. The appearance is simple and lightweight, and it is easy to transport.

DMX-512 control connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving heads be connected together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors. For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control

signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see the illustrations below.