10Dot 30W Cob 4IN1 Wall Washer

5x30w Led Bar COB led wall washer light RGBW 4 in 1 LED Individual Control wash bar dmx stage party lighting

Cleaning and Maintenance

1. In order to ensure the projector could work normally,. It should always be kept clean.
The lens should also be regularly cleaned to maintain optimum light output.
Do not use any type of solvent on the lens. It will damage the projector.

2. Suggestion: The continued usage of the light shouldn't exceed 4 hours. Or it will reduce the use of the lamp. Please use the alternative operation to solve this problem.
The fixture power on time is best not over 48 hours, or it would generate a lamp protection procedure.

3. Please disconnect the power supply when beginning maintenance and take down the light.
Please let the parts cool down for 10 minutes at least, then begin to install.

4. Please inspect the lens or other moving parts for timing and keep them clear and static. If you find anything damaged or loose, you must change or fix the lamp in order to avoid an accident.
Please check if the mechanical parts are jamming. After cleaning,please add some temperature-durable juice.

5. The light uses a strong, cool system.It is easy for the dirty to be collected. Please do clear the hot-sak one time every two weeks at least.

6. After you use the light,please check the intake place to see if there is any wastepaper, Please clean it up,or the windmill will break down and cause fire.