GT640 Puzzle Bar Lights 6*40w RGBW 4in1 LED
Product Size:
roduct D etails:
Product Effect:
Product Description:
VSHOW new arrival GT640 Puzzle Bar lights 6*40w RGBW 4in1 LED fixture beam zoom wash moving head light
LED technical parameters:
input Voltage: 100-240V, 50/60Hz
Output Voltage: V1:36V (board + LED driver) V2:12V (cooling fan + display)
Power consumption: 220W
Power supply: 300W
Light source: 6x40W RGBW 4IN1 LED
Light source life: 20000+ hours
Can adjust color temperature?
Dimmer:0-100%(16bit)Smooth dimming
Strobe: 1-30Hz/S outstanding strobe effect with variable speed
Zoom angle: 2-45 °
Operate mode: Master/Slave,Auto, DMX512, RDM
DMX Channel: 16/22/36CH
Four dimming modes: linear, square law, inv, SQ Law and S Curve
Color mode: RGB/CMY switching usage
Excellent color mixing effect
Single point single control is possible to create rich effects
Each motor can be independently controlled to achieve 3D stereoscopic effects
The four directions can be seamlessly joined, and the spacing of each LED is the same
Display: LCD display,Touch buttons
3-pin/5-pin512signal In/Out Power in/out
Fixture size: 510.6*85*302mm
N. W:7KG
G. W:9KG
Features :
This fixture is a multifunctional effect light that integrates beam, dyeing, and dynamic effects. It can achieve seamless splicing of multiple fixtures, and the LED after splicing is still equidistant. The beam emitted by the LED after splicing can cover a wide area, and each can independently control the zoom angle. It has rich built-in color macro effects, adjustable effect direction, color temperature, built-in zoom macro function, variable speed, and RGB/CMY color control mode selection. It can switch in real-time and has multiple dimming modes to meet the needs of different places. The radiator base plate is evenly distributed with 5 PCS silent fans, which can quickly export the heat generated by LEDs. The appearance is simple and lightweight, and it is easy to transport.
DMX-512 control connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving heads be connected together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors. For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control
signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see the illustrations below.
Recommended for you
Customer unboxing GT640 VSHOW Led Beam Wash Light GT640 6*40W RGBW 4IN1 Led Puzzle Matrix
VSHOW will attend SMEX exhibition in Indonesia from 1-4 aurgust 2024
VSHOW DMX Amplifier 8ports/8Ways Artnet controller/RDM Control Machine
VSHOW IP1820 18x20W RGBWAUV 6in1LED Washer LED Bar
Products
What's the difference between VSHOW products and others?
VSHOW offers a variety of exclusive customized products, known as private models, renowned for their superior quality and richer effects. Beyond these private model products, we consistently utilize top-notch materials and craftsmanship across our entire product range. Despite similar appearances to other products on the market, ours boast higher quality, an extended lifespan, and superior performance.
What is your order lead time?
If there is a product in stock, it usually takes 1-2 days to ship, while products without stock take approximately 5-7 working days to ship.
Shipping Logistics
How long does it take to send out?
1. If it is not customized and is not in stock, it will be shipped within 3-5 days.
2. If there is a stage light customization service, there will be additional customization time.
Company
When is VSHOW founded?
VSHOW was established in 2010.
Customized Services
Which products can be customized?
1. All products and flight cases can be printed with custom logos.
2. A moving head light can make a custom glass pattern.
Let's Talk
Our team is here for you, ready to listen and respond to all your inquiries with professionalism and passion.
We’re eager to learn more about your needs and begin working together. Drop us a message or give us a call, and let’s start building something extraordinary together!
© 2024 VSHOW. All Rights Reserved.