VSHOW Classic 7R Moving Head Lamp 230W

Parameter

Input Voltage: 100-240V, 50/60Hz

 Output Voltage: V1:36V (master board), V2:12V (cooling fan) , V3:380V (lamp)

Power consumption: 300 W

Power supply: 400W

Light source: OSRAM SIRIUS HRI 231W (2500 hours)

Color temperature: 7900K

Diameter of optic lens: 136mm

Beam angle: 2.°

Color wheel: 1 color wheel, 14 fixed colors plus white, two-way rainbow effect

Static Gobo: 17 gobos plus 1 white circle

Prism: equipped with 12 prisms and 16+16 double-layer  prisms, the two prisms

can be stacked and rotated in both directions

DMX Channel: 18CH

Operate mode: DMX512, Auto, master/slave, RDM

Electric focusing system

Outstanding strobe effect with variable speed

 0–100% smooth dimming

2.8 inch LCD display

Power Outlet: Power Connector Input/Output

Signal Outlet: standard 3-pin XLR socket (can be customized with a 5-pin XLR socket)

Installation: 2x fast lock

Fixture size: 338x256x512mm

 Net weight: 16.6 kg

 Features: B230, with a color temperature up to 7900K combined with the rainbow effect of two-way rotation, can produce excellent color macro; The beam angle is 2 °, the beam is straight and sharp, and it is equipped with 12 prisms (16+16 prisms) that can be superimposed and rotated to easily achieve the stage atmosphere rendering effect. Excellent performance

Effect Wheels

Light Source

OSRAM SIRIUS HRI 231W

Because of its high internal pressure, there might be a risk that the discharge lamp would explode during operation. The lamp emits intense UV radiation, which is harmful to the eyes and skin. The high luminance of the arc can cause severe damage to the retina if you take a close look at the lamp.

To protect the lamp, always turn off the lamp first (via the control panel or DMX controller) and let the unit run for at least five minutes to cool down before switching off the mains supply. Never handle the lamp or luminary when it is hot.

Do not touch the bulb with your bare hands. If this happens, clean the lamp with denatured alcohol and wipe it with a lint-free cloth before installation.

The lamp generates UV radiation. Never operate the lamp without appropriate shielding.

When lighting up, the lamp operates at high pressure, and there is a slight risk of arc tube rupture. The risk increases with age, temperature, and improper handling of the lamp. Do not use the lamp longer than its lifespan.

Make sure the lamp is located in the center of the reflector for the best projection.